Multidisciplinary action in a patient with cleft lip and palate: esthetic-functional dentofacial treatment for more than two decades / Atuação multidisciplinar em paciente com fissura lábio palatina: tratamento estético-funcional dento-facial de mais de duas décadas

Cleft lip and palate is a very common congenital defect in which embryonic facial processes do not achieve the ideal facial formation during their development which can cause malformation. Multiple dentistry specializations, especially oral and maxillofacial, orthodontics, oral rehabilitation and dental aesthetics are required in order to correct lip and oral cavity malformations by this congenital defect with the objective of functional and aesthetics improvement. The clinical case reported show the multidisciplinary approach in a patient with cleft lip and palate implementing an aesthetic and functional dentofacial rehabilitation. The case involves a 27-year-old female patient LCLG, Caucasian, with the presence of unilateral congenital cleft lip and palate on the left side, who started rehabilitative and reparative treatment at 3 months of age. She then started pediatric orthodontic treatment for angle class 3 crossbite correction at 7 years of age. After complete replacement of deciduous to permanent dentition at the age of 11, the patient started orthodontic treatment with a fixed appliance for several years and restorative treatment with composite resin reanatomize the anterior teeth due to agenesis of elements 22 and 25. After a few years when the resin restorations were no longer biologically favorable, an aesthetic rehabilitation treatment with ceramic laminates was planned through smile digital planning soon after completing the orthodontic treatment. This case report demonstrates that high aesthetic, functional and psychological expectations of a patient with congenital defect compromise throughout her life were met through a multidisciplinary dental treatment based on correct diagnosis and digital planning (AU)

A fissura labiopalatal é um defeito congênito muito comum, no qual os processos faciais embrionários não atingem a formação facial ideal durante o seu desenvolvimento, podendo causar malformações. Múltiplas especializações da odontologia, principalmente buco-maxilo-facial, ortodontia, reabilitação oral e estética dental são necessárias para corrigir as malformações labiais e da cavidade oral por esse defeito congênito com o objetivo de melhoria funcional e estética. O caso clínico relatado mostra a abordagem multidisciplinar em um paciente com fissura labiopalatal implementando uma reabilitação dentofacial estética e funcional. O caso envolve uma paciente do sexo feminino, 27 anos, LCLG, branca, com presença de fissura labiopalatal congênita unilateral à esquerda, que iniciou tratamento reabilitador e reparador aos 3 meses de idade. Após a substituição completa da dentição decídua pela permanente aos 11 anos de idade, a paciente iniciou tratamento ortodôntico com aparelho fixo por vários anos, e tratamento restaurador com resina composta para reanatomizar os dentes anteriores devido à agenesia dos elementos 22 e 25. Após alguns anos em que as restaurações em resina não eram mais favoráveis biologicamente, foi planejado um tratamento reabilitador estético com laminados cerâmicos através do planejamento digital do sorriso logo após a finalização do tratamento ortodôntico. Este relato de caso demonstra que as altas expectativas estéticas, funcionais e psicológicas de uma paciente com comprometimento de defeito congênito ao longo de sua vida foram atendidas por meio de um tratamento odontológico multidisciplinar baseado em diagnóstico correto e planejamento digital (AU)

Influence of Zingiber officinale Extract on Push-Out Bond Strength of Glass-Fiber Post.

The aim of this study was to evaluate in vitro the influence of 20% glycolic ginger extract on the bond strength of glass-fiber post cemented with etch-and-rinse or self-etching resin cement. Forty-eight bovine roots were standardized (17±0.5 mm) and randomly divided into two groups, according to irrigant used during biomechanical preparation: NaOCl: 1% sodium hypochlorite and GEN: 20% glycolic ginger extract. Root canal was prepared and randomly assigned to one of two subgroups (n=12), according to luting protocol: self-etching (RelyX U200) and etch-and-rinse (RelyX ARC). After 48 h, the roots were sectioned perpendicularly (4 in cervical third and 3 in middle third) and submitted to push-out bond strength test (50 kgf load cell, 1.0 mm/min). Failure mode was analyzed in SEM and stereomicroscopy. Data were analyzed by three-way ANOVA and Tukey tests (p<0.05). ANOVA revealed that there were no significant differences between U200 (2.01±0.17)B and ARC (1.93±0.12)B in GEN group, and at the cervical third for both irrigants, 2.69±0.16A and 2.54±0.17A, respectively. Middle third showed lower bond strength than cervical third, regardless the irrigant. Overall, the cervical third regardless the irrigant employed and the association between NaOCl and ARC, presented better adhesive performance.

Bond strength of a self-adhesive resin cement to enamel and dentin.

The purpose of this study was to evaluate the influence of surface treatments and thermocycling on the microtensile bond strength (µTBS) of self-adhesive resin cement to human enamel and dentin. Eighty human third molars were selected. The crowns of 40 teeth were transversally sectioned, exposing the mid-coronal dentin. The buccal surfaces of the other 40 teeth were grinded to obtain a 5 mm2 flat enamel area. Eighty resin blocks were produced and cemented to the dental surfaces with RelyX Unicem, then grouped according to the surface treatment (n=10): UnicemC with no conditioning, UnicemP with 37% phosphoric acid/15 s, and UnicemPA with 37% phosphoric acid/15 s plus adhesive bonding (Single Bond 2). There were two control groups, one for enamel and the other for dentin: VR with 37% phosphoric acid/15 s plus adhesive bonding (Single Bond 2) plus Variolink II. The enamel-dentin resin cement blocks were sectioned to produce non-trimmed bar specimens, which were divided into two storage conditions: dry, µTBS immediately after cutting; TC (5,000 x; 5°C/55°C). The samples were submitted to µTBS, and data were statistically analyzed by ANOVA and Tukey's test. The results showed statistical differences between UnicemC and the others. UnicemPA and VR showed better bond strength to dentin during the period before and after thermocycling, respectively. For the enamel, UnicemP showed better bond strength for both situations. Only for UnicemPA did the thermocycling significantly decrease the bond strength values. Within the limits of this study, it could be concluded that the bond strength is influenced by the surface treatments, and that thermocycling decreases the bond strength of all groups, but significantly only for UnicemPA.

Effectiveness and biological compatibility of different generations of dentin adhesives.

OBJECTIVES: Besides possessing good mechanical properties, dental materials should present a good biological behavior and should not injure the involved tissues. Bond strength and biocompatibility are both highly significant properties of dentin adhesives. For that matter, these properties of four generations of adhesive systems (Multi-Purpose/Single Bond/SE Plus/Easy Bond) were evaluated. MATERIALS AND METHODS: Eighty bovine teeth had their dentin exposed (500- and 200-µm thickness). Adhesive was applied on the dentin layer of each specimen. Following that, the microshearing test was performed for all samples. A dentin barrier test was used for the cytotoxicity evaluation. Cell cultures (SV3NeoB) were collected from testing materials by means of 200- or 500-µm-thick dentin slices and placed in a cell culture perfusion chamber. Cell viability was measured 24 h post-exposition by means of a photometrical test (MTT test). RESULTS: The best bonding performance was shown by the single-step adhesive Easy Bond (21 MPa, 200 µm; 27 MPa, 500 µm) followed by Single Bond (15.6 MPa, 200 µm; 23.4 MPa, 500 µm), SE Plus (18.2 MPa, 200 µm; 20 MPa, 500 µm), and Multi-Purpose (15.2 MPa, 200 µm; 17.9 MPa, 500 µm). Regarding the cytotoxicity, Multi-Purpose slightly reduced the cell viability to 92% (200 µm)/93% (500 µm). Single Bond was reasonably cytotoxic, reducing cell viability to 71% (200 µm)/64% (500 µm). The self-etching adhesive Scotchbond SE decreased cell viability to 85% (200 µm)/71% (500 µm). Conversely, Easy Bond did not reduce cell viability in this test, regardless of the dentin thickness. CONCLUSIONS: Results showed that the one-step system had the best bond strength performance and was the least toxic to pulp cells. In multiple-step systems, a correct bonding technique must be done, and a pulp capping strategy is necessary for achieving good performance in both properties. CLINICAL RELEVANCE: The study showed a promising system (one-step self-etching), referring to it as a good alternative for specific cases, mainly due to its technical simplicity and good biological responses.

Effect of carbamide peroxide bleaching gel concentration on the bond strength of dental substrates and resin composite.

PURPOSE: This study evaluated the effect of bleaching gel containing 10%, 15% and 20% carbamide peroxide (CP) on the bond strength of dental enamel or dentin and resin composite restorations. METHODS: The buccal surfaces of 12 bovine tooth crowns were conditioned with 37% phosphoric acid, and the adhesive resin Single Bond 2 and the resin composite Filtek Z350 were used to perform the restorations. The blocks were sectioned to obtain bar specimens. Each specimen group (enamel-E, dentin-D) was divided into four subgroups (n=15): S-artificial saliva; 10-10% CP bleaching; 15-15% CP bleaching; 20-20% CP bleaching. CP was applied for six hours daily for two weeks. The specimens were submitted to the sigma test in a universal testing machine. The data were analyzed by one-way ANOVA and the Tukey post-hoc test and a correlation analysis (r) was performed. RESULTS: For Group E, the mean value (+/- standard-deviation) was 21.86 (+/- 6.03)a, 18.91 (+/- 8.31)ab, 15.43 (+/- 7.44)b and 10.6 (+/- 4.94)c for ES, E10, E15 and E20, respectively. For Group D, the a values were 34.73 (+/- 4.68)a, 35.12 (+/- 13.43)a, 29.67 (+/- 6.84)ab and 24.56 (+/- 6.54)b for DS, D10, D15 and D20, respectively. A negative correlation between the CP concentration and mean values was observed for both the enamel (r=-0.95) and dentin (r=-0.85) groups. CONCLUSION: In the current study, the bond strength of the restoration to enamel and the restoration to dentin were influenced by the application of CP and was dependent on the CP concentration in the bleaching gel.